IPE hardwood fence modern - 9.0 cm slats

ON STOCK - Free delivery throughout the UK from £4500
Up to £4500 delivery charge £200
Delivery time approx 7 business days, at your door step
Free advice and assistance from our AdviceTeam, at your service

For example: Do you need a total of 10 meters of fence?
Choose the desired height of the fence, and choose 1 or 2 sides lamellar lining
Next, click on the + until the number is 10.

For each slatted fence we supply
Enough hardwood fence posts in length of 3.00 m1 (to be placed approx. 1 m1 apart). Enough hardwood fence boards (Lamell size 2.1 x 9.0 cm). Enough black screws + black mounting clips to mount the modern wooden slats.

1-side wood means that the slats are mounted on 1 side of the posts. With a 2-side fence both sides are covered with wooden slats. Both for a 1-side and a 2-side wooden fence we deliver enough posts, clips and screws + wooden slats to make your project. We do advise to always order a bit more, to compensate for sawing loss.

Tip: Add epdm cloth to your order, for absolute pivacy and extra soundproofing. And wood oil to prevent ageing.

Oiling your fence
Order Per 2.7 litres, then you can fully oil approx 10 m1 single sided fence. Repeat this twice a year. This keeps the fence in the original wood colour, and the wood does not absorb dirt. You also extend the life span. If you do not oil the fence, it will gradually turn mouse-grey after about 6 months. Once the wood has turned grey, it cannot be restored to its original colour.

Invisible screws
By using mounting clips, the fence is screwed invisibly. The mounting clip and the screw are hardly visible. In each slat, longitudinal grooves have been made, in which the mounting clip is inserted. The clip is also the spacer between the boards. The distance between the boards is approx. 5 mm. The mounting clip is also the spacer between the boards. Fast and easy installation is guaranteed. Important: Always place an extra cobra clip at the end of a plank, both at the top and the bottom of the end/transition of each plank, also when a clip cannot be screwed onto a support, place a clip. This way, every end of the board is well clamped, and the effect is minimal.

Order
You can order per meter length (m1) of fence. For example, for an 8 m1 long fence, click on the + until the number 8 is reached. To choose for a single or double sided lamellae fence. The mounting clip gives a space of about 5 mm, our wood delivery is based on this. We supply enough slats, posts, clips and screws to make the modern fence.

An optical defect can occur in a natural product. Wood lives, and no two boards are the same, which is precisely the charm of all wood products. Sometimes an unassembled board can be slightly warped by the effects of sun and water, and not everyone is equally skilful at assembling it straight. Usually there is some sawing loss. We therefore recommend always ordering an extra 1 metre of fence, to avoid back orders and extra costs.

Always store the wood that you have not yet processed, covered and bound together, in a dry place. Also during assembly, never place unassembled wood in the sun. Ipe wood is very stable wood, durable and strong. All our hardwood products have a long service life. Ipe wood has a service life of at least 30 years or more.

Slat lengths
We supply at least 1 or more lengths of fence planks, most common lengths are 0.90 -1.20 -1.50 or 1.80 m1 or longer. Provided with a tongue and groove at the ends of the planks. The ends of the planks do not have to end up on a stand. The length that will be delivered depends on the available stock. We cannot determine in advance which length you will receive. The photos of the product show mainly the lengths of 0.90 and 1.20 m1, wild correlation gives the best result and most power to your modern lamellae fence. The sawn off parts should be reused, as shown on the video.

The uprights are placed every 1.00 m1 from each other. Placing them in random order gives the best end result. The uprights are completely covered by the horizontal slats. Always install from bottom to top. Do not forget to check each row of slats with a spirit level. You can correct this by not allowing the slat to fully connect to the clip.

Assembling the modern fence
Start by placing the posts in line. The uprights are completely covered by the horizontal strips. Always assemble from bottom to top. Do not forget to check each row of slats with a spirit level. You can correct the slat by not fully connecting it to the clip.

Depending on the available stock, we deliver one or more lengths. All boards are always equipped with a tongue and groove at the ends. This means that the end of the board does not have to be exactly level with the upright. Always place an extra cobra clip at the end of a board, both at the top and the bottom of the end/transition of each board, even if a assembly clip cannot be screwed onto a support. This ensures that each end of the slat/board is properly clamped, and that the effect is minimal. 

There are always leftover parts during assembly, the sawn-off parts. These should be reused. We supply enough wood to be able to make the metres ordered. The most beautiful and sturdiest result is wild-cornered installation, as shown in the photos, our wood delivery is based on this. 

You always start with the bottom slat. Mount the first row of slats one after the other. Place a clip at each transition of the slats and a mounting clip at each upright. Stack the next row of slats on top of this. You need to reuse the sawn off parts. Repeat the process until you have reached the total height. The top slat is screwed to an upright by screwing a screw obliquely into the groove of the board. In this way the top slat is fixed at the bottom with a mounting clip and at the top with a screw, and invisibly mounted. Before screwing, pre-drill the board. 

Modern fence with slats on 1 side
The distance between the slats is only 5 mm, the fixing clip is also the spacer. The transparency is minimal. If you want absolutely no visibility, first attach EPDM film to the posts and then screw the slats onto it.

Of course, the neighbours can also attach other wood to the posts, as the posts are about 1 m1 apart.

When your project is finished, simply sand the strips lightly for an even more beautiful result. Do not forget to oil? Because then the fence stays in the beautiful wood colour. If you do not use oil, the fence will turn grey over time.

Positioning of the uprights
We supply a 6.0 x 6.0 cm post/stand. A fence post must be dug into the ground about 1/3 of its length. After installation, simply saw off a piece of the post at the top. Pre-drilling is not necessary when installing the fence planks. We supply self drilling screws and cobra clips for free, these have enough power to keep the wood firmly in place. The standard pole distance is about 1.00 m1. 

We recommend setting the top of the post a few cm higher than the desired height of your fence. After installing the slats, saw off the top of the post to ensure that you can screw the highest slat properly too.

You can choose to reinforce the posts with concrete in the ground. We recommend doing this only if there is a lot of wind. Usually, posts are buried by digging a hole, placing the post and filling the hole with sand. Then it is important to let the loosened sand settle by spraying water on it. This will compact the sand bed and make the post more stable in the ground. You can also use an auger to place the post in the ground; with this method too, it is wise to spray the sand well with water afterwards. 

Important
Always place an extra cobra clip at the end of a slat, both at the top and at the bottom of the end/transition of each slat, even if a clip cannot be screwed onto a post. This ensures that each end of the board is properly clamped, and that the effect is minimal. Watch the video for the correct assembly of the assembly clips.

Ordering large quantities?
Contact us for a special package price. Large quantities start at 50 length metres.

Did you know?
Due to our expansion, we now own timber warehouses in Belgium, the Netherlands and Germany and the UK?
We have a customer rating in Europe of 8.7 from over 4000+ reviews.
And that we are also a member of Trustpilot UK?
This guarantees completely safe orderinging.